Dell Latitude D620 ATG Service Manual

Also see for Latitude ATG D620: Quick reference guide User guide Service manual User guide Quick reference guide

Contents

Dell Latitude D620 ATG Service Manual Manual pdf 15 page image

6. Gently pull the pull-tab on the bottom flex-cable connector to release the cable from the inverter board.7. Squeeze the flex-cable release levers at either side of the top flex-cable connector, releasing the connector.Removing the Display Hinges1. Follow the instructions in Before You Begin.2. Remove the display assembly (see Display Assembly).3. Remove the display bezel (see Removing the Display Bezel).4. Remove the display Panel (see Removing the Display Panel).5. Remove the M2.5 x 5-mm screw from the right display hinge.6. Lift the right display hinge off the two alignment pins and out of the display back cover.7. Repeat step 5 and step 6 for the left display hinge.Back to Contents Page1 top flex-cableconnector2 flex-cable release levers (2) 3 back of displaypanel4 inverter board 5 pull-tab on bottom flex-cableconnectorCAUTION: Before working inside your computer, follow the safety instructions in the Product Information Guide.CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any ofyour computer's electronic components. You can do so by touching an unpainted metal surface.1 M2.5 x 5-mm screw 2 display hinges (2)(left and right)3 display back cover4 alignment pin