Adding and Replacing Parts 109Adding and Replacing PartsBefore You BeginThis chapter provides procedures for removing and installing the components in your computer.Unless otherwise noted, each procedure assumes that the following conditions exist:• You have performed the steps in "Turning Off Your Computer" on page 109 and "Before WorkingInside Your Computer" on page 109.• You have read the safety information in your Dell™ Product Information Guide.• A component can be replaced or—if purchased separately—installed by performing the removalprocedure in reverse order.Recommended ToolsThe procedures in this document may require the following tools:• Small flat-blade screwdriver• Small Phillips screwdriver• Small plastic scribe• Flash BIOS update program CDTurning Off Your ComputerNOTICE: To avoid losing data, save and close any open files and exit any open programs before you turn offyour computer.1 Shut down the operating system:a Save and close any open files, exit any open programs, click Start→ Shut Down→ Shutdown→ ΟΚ.The computer turns off after the operating system shutdown process finishes.2 Ensure that the computer and any attached devices are turned off. If your computer and attacheddevices did not automatically turn off when you shut down your operating system, press and holdthe power button for 4 seconds.Before Working Inside Your ComputerUse the following safety guidelines to help protect your computer from potential damage and tohelp ensure your own personal safety.
