Dell Latitude D820 Service Manual

Also see for Precision PP04X: Quick reference guide User guide Quick reference guide Quick reference guide

Great user manuals database on UserManuals.info1. Align the pin-1 corner of the processor module so that it points to the triangle on the system board, and insert the processor module into the ZIF socket.When the processor module is correctly seated, all four corners are aligned at the same height. If one or more corners of the module are higher than theothers, the module is not seated correctly.2. Tighten the ZIF socket by turning the cam screw clockwise to secure the processor module to the system board.3. Replace the processor thermal-cooling assembly (see Processor Thermal-Cooling Assembly).4. Update the BIOS using a flash BIOS-update program CD (see Flashing the BIOS From a CD).Back to Contents PageNOTICE: A processor module that is not properly seated can result in an intermittent connection or permanent damage to the processor and ZIFsocket.NOTICE: Hold the processor down while turning the cam screw to prevent intermittent contact between the cam screw and processor.NOTE: If a new microprocessor is installed, you will receive one of the following: a new thermal-cooling assembly which will include an affixed thermalpad; or, you will receive a new thermal pad along with a tech sheet to illustrate proper installation.