Table 3. VideoOption DescriptionLCD Brightness Allows you to set the display brightness depending up on the powersource (On Battery and On AC).NOTE: The Video setting will only be visible when a video card is installed into the system.Table 4. SecurityOption DescriptionAdmin Password Allows you to set, change, or delete the administrator (admin) password.NOTE: You must set the admin password before you set the systemor hard drive password. Deleting the admin password automaticallydeletes the system password and the hard drive password.NOTE: Successful password changes take effect immediately.Default Setting: Not setSystem Password Allows you to set, change or delete the system password.NOTE: Successful password changes take effect immediately.Default Setting: Not setInternal HDD-1 Password Allows you to set, change or delete the password on the system'sinternal hard-disk drive.NOTE: Successful password changes take effect immediately.Default Setting: Not setStrong Password Allows you to enforce the option to always set strong passwords.Default Setting: Enable Strong Password is not selected.NOTE: If Strong Password is enabled, Admin and System passwordsmust contain at least one uppercase character, one lowercasecharacter and be at least 8 characters long.Password Configuration Allows you to determine the minimum and maximum length ofAdministrator and System passwords.Password Bypass Allows you to enable or disable the permission to bypass the System andthe Internal HDD password, when they are set. The options are:• Disabled• Reboot bypassDefault Setting: DisabledPassword Change Allows you to enable the disable permission to the System and HardDrive passwords when the admin password is set.45