Dell Latitude Slate Owner's Manual

Also see for Latitude Slate: Important information Important information Manual

Contents

Dell Latitude Slate Owner's Manual Manual pdf 58 page image

Code Cause and Troubleshooting Steps1 System board: BIOS ROM failureSystem board failure, covers BIOS corruption or ROM error2 MemoryNo memory/RAM detected3 Chipset Error (North and South Bridge Chipset, DMA/IMR/ Timer Error) , Time-Of-Day Clock test failure , GateA20 failure , Super I/O chip failure , Keyboard controller test failureSystem board failure4 RAM Read/Write failureMemory failure5 Real-time clock power failCMOS battery failure6 Video BIOS test failureVideo card failure7 CPU - cache test failureProcessor failure8 DisplayDisplay failureN-trig Digitizer TroubleshootingThe N-trig Tablet Settings applet is used to adjust several settings for the digitizer. Once the N-trig drivers are loaded, anicon appears in the system tray.The following section provides troubleshooting steps to resolve Installation and Performance issues.Installation IssuesError message : “Hardware is not adequate for running this software”Troubleshooting Steps:1. Check if the bundle you are trying to run is for the right OS (Win7)2. Check if the bundle you are trying to run is for the right type (32bit, 64bit)Performance issuesNo multi touch functionality: N-trig Software Bundle Not InstalledTroubleshooting Steps:1. Check if the N-trig software bundle is installed. Open Control Panel → N-trig DuoSense Digitizer Settings . If thebundle is not installed, Install the right bundle for the operating system.58