b. Remove the module from the connector.9. Ground yourself and install the new memory module:a. Align the notch inthe module edge connrctor with the tab in the center of the connector slot.b. Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not hear the click,remove the module and reinstall it.10. Replace the cover.1 memory module2 securing clips (2)NOTE: If the memory module is not installed properly, the computer may not not boot properly. No error message indicates this failure.1 memory module2 connectorNOTICE: If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.
