|
Quick Reference Guide 213 Select Enable hibernation.4 Click Apply and OK.To enter Hibernate mode:1 Type the key sequence.2 Select Shut Down→ Hibernate.If you have set you set the power management options to Hibernate in thePower Options Properties window or the QuickSet Power ManagementWizard, you may also use one of the following methods to enter hibernatemode:• Press the power button.• Close the display.• Press .NOTE: Some PC Cards or Express Cards may not operate correctly after thecomputer exits hibernate mode. Remove and reinsert the card, or simply restart(reboot) your computer.To exit hibernate mode, press the power button. The computer may take ashort time to exit hibernate mode. You cannot make the computer exithibernate mode by pressing a key or touching the touch pad or track stick. Formore information on hibernate mode, see the documentation that came withyour operating system.Charging the BatteryWhen you connect the computer to an electrical outlet or install a batterywhile the computer is connected to an electrical outlet, the computer checksthe battery charge and temperature. If necessary, the AC adapter then chargesthe battery and maintains the battery charge.NOTE: With Dell™ ExpressCharge™, when the computer is turned off, the ACadapter charges a completely discharged battery to 80 percent in about 1 hour andto 100 percent in approximately 2 hours. Charge time is longer with the computerturned on. You can leave the battery in the computer for as long as you like. Thebattery’s internal circuitry prevents the battery from overcharging.If the battery is hot from being used in your computer or being in a hotenvironment, the battery may not charge when you connect the computer toan electrical outlet.
|
