9418 SAR DescriptionSpecific Absorption Rate (SAR)This cell phone conforms to International SAR standards.Your cell phone is a low power wireless receiver and transmitter.It is designed and manufactured not to exceed the recommendedupper SAR International standard values. These upper values arewithin the scope of the national standard. This standard stipulatesthe permitted SAR values for the general public. The standardwas formulated after careful research by international independentscientific organizations. These organizations also carry out regularreviews of the standards to ensure their effectiveness. The standardsinclude a large number of safety parameters to ensure the personalhealth and safety of users of any age.The phone's emissions are measured and evaluated according to theirSAR (Specific Absorption Rate). Based on the standard, the upperrecommended SAR value for this cell phone is 2.0W/kg per 10g*.The testing of the SAR values of this cell phone is carried out usinga standardized testing program. This tests the highest power outputfor all frequency bands during regular usage.Although the SAR is tested at maximum power, in reality theSAR values are considerably lower than the maximum valuesduring regular use. This is because the cell phone is designed witha number of output powers. During regular operation, the powerrating required need only be enough to allow the phone to connectto the network. Usually the closer the phone is to the base station,the lower the output power needs to be.