Dell Mobile M115HD User Manual

Also see for Mobile M115HD: Installation guide Specifications Wireless installation guide Quick start guide

NOTE: Turn on the projector before you turn on the source(computer, DVD player, etc.). The Power button light blinks whiteuntil pressed.1 Connect the power cord with AC adapter and appropriate signal cables tothe projector. For information about connecting the projector, see"Connecting Your Projector" on page 7.2 Press the Power button (see "Using the Control Panel" on page 20 tolocate the Power button).3 Turn on your source (computer, DVD player, etc).4 Connect your source to the projector using the appropriate cable. See"Connecting Your Projector" on page 7 for instructions to connect yoursource to the projector.5 By default, the input source of the projector is set to VGA. Change theinput source of the projector if necessary.6 If you have multiple sources connected to the projector, press the Sourcebutton on the remote control or control panel to select the desiredsource. See "Using the Control Panel" on page 20 and "Using the RemoteControl" on page 22 to locate the Source button.3 Using Your ProjectorTurning Your Projector OnTurning Your Projector OffCAUTION: Unplug the projector after properly shutting down asexplained in the following procedure.1 Press the Power button. Follow the instruction displayed on screen toproperly turn off the projector.NOTE: The "Press Power Button to Turn off Projector" message willappear on the screen. The message disappears after 5 seconds or youcan press the Menu button to clear it.2 Press the Power button again. The cooling fans continue to operate for120 seconds.3 To power off the projector quickly, press the Power button and hold for 1second while the projector’s cooling fans are still running.Using Your Projector 15