Table 37. System setup options—System Management menu (continued)System ManagementPower-on-Self-Test AutomaticRecoveryEnables or disables automatic recovery if the computer is unresponsive afterthe BIOS Power-on-Self Test.Default: ONTable 38. System setup options—Keyboard menuKeyboardFn Lock Options Enables or disables the Fn lock options.Default: ONLock Mode Enables or disables the Function keys to have secondary functions.By default, the Lock Mode Secondary option is enabled. With this option, theF1-F12 keys scan the code for their secondary functions.Keyboard Illumination Configures the keyboard illumination settings.By default, the Bright option is enabled.Keyboard Backlight Timeout on AC Sets the timeout value for the keyboard backlight when an AC adapter isconnected to the system.By default, the 1 minute option is enabled.Keyboard Backlight Timeout onBatterySets the timeout value for the keyboard backlight when the computer isrunning only on battery power.By default, the 1 minute option is enabled.Table 39. System setup options—Pre-boot Behavior menuPre-boot BehaviorAdapter WarningsEnable Adapter Warnings Enables or disables the warning messages during boot when the adapters withless power capacity are detected.Default: ONWarning and Errors Sets the action to be taken when a warning or error is encountered.By default, the Prompt on Warnings and Errors option is enabled.USB-C Warnings Enables or disables dock warning messages.Default: ONFastboot Allows you to configure the speed of the UEFI boot process.By default, the Thorough option is enabled.Extend BIOS POST Time Set the BIOS POST load time.By default, the 0 seconds option is enabled.Table 40. System setup options—Virtualization menuVirtualizationIntel Virtualization TechnologyEnable Intel Virtualization Technology(VT)When enabled, the system can run a Virtual Machine Monitor (VMM).Default: ONVT for Direct I/OBIOS setup 97