Dell Networking N4000 Series Getting Started Manual

Also see for N4000 Series: Reference guide Reference guide Configuration guide Configuration guide Getting started guide

Contents

Dell Networking N4000 Series Getting Started Manual Manual pdf 15 page image

Installation 13Unpacking StepsNOTE: Before unpacking the switch, inspect the container and immediately reportany evidence of damage.1 Place the container on a clean, flat surface and cut all straps securing thecontainer.2 Open the container or remove the container top.3 Carefully remove the switch from the container and place it on a secureand clean surface.4 Remove all packing material.5 Inspect the product and accessories for damage.Rack Mounting the SwitchYou may either place the switch on the rack shelf or mount the switch directlyinto a 19" wide, EIA-310-E compliant rack (four-post, two-post, or threadedmethods). The Dell ReadyRails™ system is provided for 1U front-rack, andtwo-post installations. The ReadyRails system includes two separatelypackaged rail assemblies and two rails that are shipped attached to the sidesof the switch.WARNING: This is a condensed reference. Read the safety instructions in yourSafety, Environmental, and Regulatory information booklet before you begin.NOTE: The illustrations in this document are not intended to represent a specificswitch.