Dell OptiPlex 3020 Owner's Manual
Also see for OptiPlex 3020: Quick start guideSpecificationsOwner's manualTechnical guidebookTechnical guidebook
                                                  | |
Contents
| 
Installing the Drive Cage1. Place the drive cage on the edge of the computer to allow access to the cable connectors on the hard drive.2. Connect the data and power cables to the back of the hard drive.3. Flip over the drive cage and insert it into the chassis. The drive cage tabs are secured by the slots in the chassis.4. Slide the drive-cage handle toward the locked position.5. Install the:a) front bezelb) optical drivec) cover6. Follow the procedures in After Working Inside Your Computer.Removing the Hard Drive1. Follow the procedures in Before Working Inside Your Computer.2. Remove the:a) coverb) optical drivec) drive cage3. Perform the following steps as shown in the illustration: anda) Press the retention clips inwards [1].b) Slide the hard-drive bracket out from the drive cage. [2].4. Flex the hard-drive bracket and remove the hard drive from the bracket.12 Disassembly and reassembly |
Related manuals for Dell OptiPlex 3020
Dell OptiPlex 3020 Owner's Manual
Dell OptiPlex 3020M Owner's Manual
Dell OptiPlex 3020M Owner's Manual
Dell OptiPlex 3020M Owner's Manual
Dell OptiPlex 3020M Owner's Manual
Dell OptiPlex 3050 Owner's Manual
Dell OptiPlex 7020 Owner's Manual
Dell OptiPlex 9020 Owner's Manual
Dell OptiPlex 3010 Owner's Manual
Dell OptiPlex 3040 Owner's Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine