Dell OptiPlex 5250 Owner's Manual

Also see for OptiPlex 5250: Owner's manual Owner's manual Quick start guide Owner's manual Owner's manual

Contents

Dell OptiPlex 5250 Owner's Manual Manual pdf 34 page image

h SSD cardi WLAN cardj memoryk heat sinkl system fan3 To remove the processor:a Release the socket lever by pushing the lever down and out from under the tab on the processor shield [1].b Lift the lever upward and lift the processor shield [2].CAUTION: The processor socket pins are fragile and can be permanently damaged. Be careful not to bendthe pins in the processor socket when removing the processor out of the socket.c Lift the processor out of the socket [3].NOTE: After removing the processor, place it in an antistatic container for reuse, return, or temporarystorage. Do not touch the bottom of the processor to avoid damage to the processor contacts. Touch onlythe side edges of the processor.Installing the processor1 Align the processor with the socket keys.CAUTION: Do not use force to seat the processor. When the processor is positioned correctly, it engages easily into thesocket.2 Align the pin-1 indicator of the processor with the triangle on the socket.3 Place the processor on the socket such that the slots on the processor align with the socket keys.4 Close the processor shield by sliding it under the retention screw.5 Lower the socket lever and push it under the tab to lock it.6 Install:a system fanb heat sinkc memoryd WLAN carde SSD cardf system board shieldg VESA mount bracketh cable coveri speakerj speaker coverk back coverl stand7 Follow the procedure in After working inside your computer.34 Removing and installing components