Dell OptiPlex 745c Quick Reference Manual

Also see for OptiPlex 745c: Administrator's guide User guide Quick reference guide

Quick Reference Guide 23Dell Diagnostics Main Menu1 After the Dell Diagnostics loads and the Main Menu screen appears, click the button for the optionyou want.2 If a problem is encountered during a test, a message appears with an error code and a description of theproblem. Write down the error code and problem description and follow the instructions on thescreen.If you cannot resolve the error condition, contact Dell. For information on contacting Dell, see youronline User’s Guide.NOTE: The Service Tag for your computer is located at the top of each test screen. If you contact Dell,technical support will ask for your Service Tag.3 If you run a test from the Custom Test or Symptom Tree option, click the applicable tab described inthe following table for more information.Option FunctionExpress Test Performs a quick test of devices. This test typically takes 10 to 20 minutes andrequires no interaction on your part. Run Express Test first to increase thepossibility of tracing the problem quickly.Extended Test Performs a thorough check of devices. This test typically takes an hour or moreand requires you to answer questions periodically.Custom Test Tests a specific device. You can customize the tests you want to run.Symptom Tree Lists the most common symptoms encountered and allows you to select a testbased on the symptom of the problem you are having.Tab FunctionResults Displays the results of the test and any error conditions encountered.Errors Displays error conditions encountered, error codes, and the problemdescription.Help Describes the test and may indicate requirements for running the test.Configuration Displays your hardware configuration for the selected device.The Dell Diagnostics obtains configuration information for all devices fromsystem setup, memory, and various internal tests, and it displays theinformation in the device list in the left pane of the screen. The device list maynot display the names of all the components installed on your computer or alldevices attached to your computer.Parameters You can customize the test by changing the test settings.book.book Page 23 Wednesday, March 14, 2007 11:21 AM