|
Using the System Setup Program 2-13To clear this field and allow future intrusions to be detected, enter the System Setupprogram, as described in “Entering the System Setup Program” found earlier thischapter. At the Chassis Intrusion category, use the left- or right-arrow key to chooseReset. Then press to save the change and reboot the system.NOTE: When enabled, the setup password is required in order to reset the ChassisIntrusion category from Detected to Not Detected. You cannot reset the ChassisIntrusion category without a password..H\ERDUG1XP/RFNKeyboard NumLock determines whether your system boots with the Num Lock modeactivated on 101- or 102-key keyboards (it does not apply to 84-key keyboards).When Num Lock mode is activated, the rightmost bank of keys on your keyboard pro-vides the mathematical and numeric functions shown at the tops of the keys. WhenNum Lock mode is turned off, these keys provide cursor-control functions according tothe label on the bottom of each key.5HSRUW.H\ERDUG(UURUVReport Keyboard Errors enables or disables reporting of keyboard errors during thePOST, which is a series of tests that the system performs on the hardware each timeyou turn on the system or press the reset button.This category is useful when applied to self-starting servers or host systems thathave no permanently attached keyboard. In these situations, selecting Do Not Reportsuppresses all error messages relating to the keyboard or to the keyboard con-troller during POST. This option does not affect the operation of the keyboarditself if a keyboard is attached to the computer.$XWR3RZHU2QAuto Power On allows you to set the time and days of the week to turn on the com-puter system automatically. You can set Auto Power On to turn on the system eitherevery day or every Monday through Friday.NOTE: This feature does not work if you turn off your system using a power strip orsurge protector.Time is kept in a 24-hour format (hours:minutes). To change the start-up time, pressthe right-arrow key to increase the number in the highlighted field or press the left-arrow key to decrease the number. If you prefer, you can type numbers in both fields.The default for Auto Power On is Disabled.:DNHXS2Q/$1Wakeup On LAN determines whether the Wakeup On LAN feature is set to On or Off.You must reboot your system before a change takes effect.
|
