Dell OptiPlex GX400 Service Manual

Also see for OptiPlex GX400: Setup and quick reference guide User guide Setup and quick reference guide

Dell OptiPlex GX400 Service Manual Manual pdf 11 page image

Back to Contents PageDisk Drives and MediaDell™ OptiPlex™ GX400 Service ManualDrive LocationRemoving the Floppy DriveReplacing the Floppy DriveRemoving a CD, Zip, or Other External DriveReplacing a CD, Zip, or Other External DriveRemoving a Hard DriveReplacing a Hard DriveDrive LocationDrive LocationsRemoving the Floppy Drive1. Turn off the computer and devices, disconnect them from their electrical outlets, wait at least 5 seconds, and then remove the computer cover.2. Rotate the power supply away from the system board.3. Remove the front panel.4. Disconnect the DC power and interface cables from the back of the drive.CAUTION: Before you perform this procedure, see "Precautionary Measures."NOTICE: Before disconnecting a device from the computer or removing a component from the system board, verify that the standby power light on the systemboard has turned off. To locate this light, see "System Board Components."