Table 34. System setup options—Security (continued)SecuritySHA-256 This option is enabled by default.Clear This option is disabled by default.PBI Bypass for Clear Commands This option is disabled by default.Intel Total Memory Encryption The Multi-Key Total Memory Encryption (Up to 16 keys) option is disabled bydefault.SMM Security Mitigation This option is disabled by default.Absolute This option is enabled by default.Chassis intrusion This option is disabled by default.Block Boot Until Cleared This option is disabled by default.Data Wipe on Next Boot This option is disabled by default.UEFI Boot Path Security The option Always Except Internal HDD is enabled by default.Authenticated BIOS interface This option is disabled by default.Legacy Manageability Interface Access This option is disabled by default.Table 35. System setup options—Passwords menuPasswordsAdmin Password Set, change, or delete the administrator password.System Password Set, change, or delete the computer password.Internal HDD-0 Password Set, change, or delete the Internal HDD-0 password.M.2 PCIe SSD-0 Set, change, or delete the M.2 PCIe SSD-0 password.Password ConfigurationUpper Case Letter Reinforces password must have at least one upper case letter.By default, the option is disabled.Lower Case Letter Reinforces password must have at least one lower case letter.By default, the option is disabled.Digit Reinforces password must have at least one digit.By default, the option is disabled.Special Character Reinforces password must have at least one special character.By default, the option is disabled.Minimum Characters Set the minimum characters allowed for password.Password Bypass When enabled, this always prompts for computer and internal hard drivepasswords when powered on from the off state.By default, the Disabled option is enabled.Password ChangesEnable Non-Admin Password Changes Enable or disable to change computer and hard drive password without theneed for admin password.By default, the option is enabled.Admin Setup Lockout114 BIOS setup