Steps1. Remove the seven screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly.2. Loosen the two captive screws.3. Using a plastic scribe, pry the base cover from the bottom left and continue to work on the sides to open the base cover.4. Lift and slide the base cover off the palm-rest and keyboard assembly.Installing the base coverPrerequisitesIf you are replacing a component, remove the existing component before performing the installation process.About this taskThe following image(s) shows the base cover and provides a visual representation of the installation procedure.14 Removing and installing components

Dell P117F001 Service Manual