20 | About Your MonitorP2717HThe OSD functions only in the normal operation mode. When any button is pressed inthe Active-off mode, the following message will be displayed:NOTE: The message may be slightly different according to the connected inputsignal.NOTE: This monitor is ENERGY STAR ®-compliant.NOTE:Pon: Power consumption of on mode as defined in Energy Star 7.0 version.ETEC: Total energy consumption in kWh as defined in Energy Star 7.0 version.* Zero power consumption in OFF mode can only be achieved by disconnecting themain cable from the monitor.** Maximum power consumption with max luminance, and USB active.This document is informational only and reflects laboratory performance. Your productmay perform differently, depending on the software, components and peripherals youordered and shall have no obligation to update such information. Accordingly, thecustomer should not rely upon this information in making decisions about electricaltolerances or otherwise. No warranty as to accuracy or completeness is expressed orimplied.VESA Modes HorizontalSyncVerticalSyncVideo PowerIndicatorPowerConsumptionNormaloperationActive Active Active White 55 W (maximum)**23 W (typical)Active-offmodeInactive Inactive Blanked White (blinking) Less than 0.3 WSwitch off - - - Off Less than 0.3 WEnergy Star Power ConsumptionP on 15.1 WE TEC 47.4 kWh