Setting up the monitor ā 31Setting up the monitorAttaching the standNOTE: The stand is not installed at the factory when shipped.NOTE: The following instructions are applicable only for attaching thestand that was shipped with your monitor. If you are attaching a standthat you purchased from any other source, follow the set upinstructions that were included with the stand.To attach the monitor stand:1. Follow the instructions on the flaps of carton to remove the stand from thetop cushion that secures it.2. Insert the stand base blocks fully into the stand slot.3. Lift the screw handle and turn the screw clockwise.4. After fully tightening the screw, fold the screw handle flat within the recess.
