PowerEdge T410 Technical Guidebook36DellThe R410/T410 BIOS does not support the following:• Embedded Diagnostics (embedded in MASER)• BIOS language localization• BIOS recovery after bad flash (but can be recovered from iDRAC6 Express)10.2 Supported ACPI StatesThe PowerEdge T410 processor supports the following C-States: C0, C1, C1E, C3, and C6. R410/T410supports all of the available C-States.The PowerEdge R410 and PowerEdge T410 support the available P-States as supported by thespecific Intel 5500 processors.Table 13. Supported P-StatesProcNumber QDF# Frequency(GHz) P-State Turbo Mode Freq(Ghz) Stepping– – 1.60 Pmin+0 – –– – 1.73 Pmin+1 – –E5502 Q1G8 1.86 Pmin+2 N/A D-0E5504 Q1GM 2.00 Pmin+3 N/A D-0L5506 Q1HG 2.13 Pmin+4 N/A D-0E5506 Q1GL 2.13 Pmin+4 N/A D-0L5520 Q1GN 2.26 Pmin+5 4C/3C: 2.42C/1C: 2.53 D-0E5520 Q1GR 2.26 Pmin+5 4C/3C: 2.42C/1C: 2.53 D-0E5530 Q1GK 2.40 Pmin+6 4C/3C: 2.532C/1C: 2.66 D-0E5540 Q1G2 2.53 Pmin+7 4C/3C: 2.662C/1C: 2.8 D-0X5550 Q1GJ 2.66 Pmin+8 4C/3C: 2.932C/1C: 3.06 D-0X5560 Q1GF 2.80 Pmin+9 4C/3C: 3.062C/1C: 3.20 D-0X5570 Q1G9 2.93 Pmin+10 4C/3C: 3.202C/1C: 3.33 D-010.3 11G BIOS Power ManagementThe PowerEdge T410 Platform supports Performance/Power Page in the BIOS configuration GUI.These BIOS features are consolidated into a single page. The BIOS also provide user-friendly PowerProfiles that adjust various BIOS settings.Some of the power management settings can be grouped together. A group of a set of differentparameters is called power profile. In total, the PowerEdge T410 BIOS setup provides five options: OS