Dell PowerConnect 2708 Getting Started Manual

Also see for 2724 - PowerConnect Switch: User guide Appendix Datasheet

Contents

Dell PowerConnect 2708 Getting Started Manual Manual pdf 7 page image

Getting Started Guide 5InstallationOverviewThis document provides basic information to install and start running the PowerConnect 27xxSeries system. For more information, see the Dell™ PowerConnect™ 27xx Series User's Guide,which is available on your Documentation CD, or check the Dell Support website atsupport.dell.com for the latest updates on documentation and software.Site PreparationPowerConnect 27xx Series devices can be mounted in a standard 48.26-cm (19-inch)equipment rack, placed on a tabletop or mounted on a wall. Before installing the unit,verify that the chosen location for installation meets the following site requirements:• Power — The unit is installed near an easily accessible 100-240 VAC, 50-60 Hz outlet.Ensure that after connection, the power LED on the device is visible.• Clearance — There is adequate frontal clearance for operator access. Allow clearance for cabling,power connections, and ventilation.• Cabling — The cabling is routed to avoid sources of electrical noise such as radiotransmitters, broadcast amplifiers, power lines, and fluorescent lighting fixtures.• Ambient Requirements — The ambient unit operating temperature range is0 to 45ºC (32 to 113ºF) at a relative humidity of up to 95 percent, non condensing.UnpackingPackage ContentsWhile unpacking the device, ensure that the following items are included:• Device/Switch• AC power cable• Self-adhesive rubber pads• Mounting kit for rack installation or wall installation• Documentation CD• Product Information GuideT9020bk2.book Page 5 Thursday, November 16, 2006 9:11 AM