Dell PowerConnect 3248 Manual

Also see for PowerConnect 3248: Features list System user's guide Specification

Contents

Addendum to the 3 248 and 52 24 User ’s Guides 23The following figure is representative of PowerConnect 5224.Switch 5224: Re-Enabling a Shutdown PortIf security is enabled on a port and you set the intrusion action to Trap andShutdown, a security violation causes the port to be disabled. To re-enable ashutdown port, follow these steps:NOTE: To re-enable aport using the CLI, usethe no shutdowncommand in InterfaceConfiguration mode.1 Click the Ports/Port Configuration page.2 For the port that is disabled, click the check box in the Admin/Opercolumn.3 Click Apply Changes to enable the port.Switch 5224: CLI CommandsThe following table summarizes the equivalent CLI commands for items inthe Ports/Port Security pages.Command Usageport security Enables port security on an interface.The no form command disables port security.