Dell PowerConnect 3324 User Manual

Also see for 3348 - PowerConnect Switch - Stackable: User guide Release note

Contents

Dell PowerConnect 3324 User Manual Manual pdf 92 page image

Querying the Dynamic Address Table:1. Open the Dynamic Address Table.2. Define the parameter by which to query the Dynamic Address Table. The Dynamic Address Table entries can be queried by interface, MAC Address, orVLAN.3. Click Query. The Dynamic Address Table is queried. The query results are sorted by the selected Address Table Sort Key field value.Querying and Sorting Dynamic Addresses Using CLI CommandsThe following table summarizes the equivalent CLI commands for querying and sorting dynamic addresses as displayed in the Dynamic Address Table page.The following is an example of the CLI commands:Console (config)# bridge aging-time 250Console (config)# exitConsole# show bridge address tableAging time is 250 secvlan mac address port type---- -------------- ----- -----1 0060.704C.73FF 5/e8 dynamic1 0060.708C.73FF 5/e8 dynamic200 0010.0D48.37FF 5/e9 staticConfiguring GARPGeneric Attribute Registration Protocol (GARP) protocol is a general-purpose protocol that registers any network connectivity or membership-style information.GARP defines a set of devices interested in a given network attribute, such as VLAN or multicast address. To open the GARP page:l Click Switch > GARP in the Tree View. The GARP page opens.CLI Command Descriptionbridge aging-time seconds Sets the address table aging time.show bridge address-table [vlan vlan] [ethernet interface | port-channel port-channel-number]Displays classes of dynamically created entries in the bridge-forwarding database.