Dell PowerConnect B-RX Getting Started Manual

Also see for PowerConnect B-RX: Configuration guide Configuration guide Installation guide Configuration guide

Contents

Dell PowerConnect B-RX Getting Started Manual Manual pdf 10 page image

10 PowerConnect B-RX Series Getting Started Guide53-1001682-03Power precautionsCAUTIONUse a separate branch circuit for each AC power cord, which provides redundancy in case one of thecircuits fails.CAUTIONMake sure to choose the appropriate circuit device, depending on the number of AC power suppliesinstalled in the chassis.DANGERDisconnect the power cord from all power sources to completely remove power from the device.DANGERMake sure that the power source circuits are properly grounded, then use the power cord supplied withthe device to connect it to the power source.DANGERIf the installation requires a different power cord than the one supplied with the device, make sure youuse a power cord displaying the mark of the safety agency that defines the regulations for power cords inyour country. The mark is your assurance that the power cord can be used safely with the device.DANGERMake sure the rack or cabinet housing the device is adequately secured to prevent it from becomingunstable or falling over.DANGERMount the devices you install in a rack or cabinet as low as possible. Place the heaviest device at thebottom and progressively place lighter devices above.