Dell PowerConnect W-650 series Installation Manual

Also see for PowerConnect W-650: Supplement Specifications Installation guide

Contents

Dell PowerConnect W-650 series Installation Manual Manual pdf 8 page image

8 | About the W-650 Series Controller Dell PowerConnect W-650 Controller | Installation GuideHardware Model OverviewFront ViewFigure 1 W-650 Series Front View1000Base-X (SFP) PortsThere are two 1000Base-X ports for fiber connectivity only and are intended for use with Dell W-Series SFPs(mini-GBICs).To purchase compatible SFP modules, contact your Dell sales representative for details and assistance.10/100/1000Base-T Gigabit Ethernet PortsThere are six 10/100/1000Base-T Gigabit Ethernet (RJ-45) ports on the W-650 Series. Gigabit Ethernet uses alleight wires and each pair is used in a bi-directional fashion, meaning the same pairs are used for both datatransmission and reception. Figure 2 illustrates the CAT-5 pin-out found on an RJ-45 connector. The CAT-5 pin-out pairs the following pins on a 10/100/1000Base-T Gigabit Ethernet port: 1/2, 3/6, 4/5, and 7/8.Figure 2 Gigabit Ethernet Port Pin-OutSerial Console PortA serial console port is provided for connection to a terminal, allowing for direct local management.10/100/1000Base-T GigabitEthernet Ports with PoE1000Base-X (SFP) PortsUSB ports10/100/1000Base-TGigabit Ethernet PortsMedia Eject ButtonSerial Console PortWLAN LEDNote: Dell tests and supports Dell optics within their controller system. Third party optics are not tested or supported; therefore,Dell does not guarantee proper functionality of third party optics when used in a Dell system.1000Base-T GigabitEthernet PortRJ-45 FemalePin-OutSignal Name12345678BI_DC+BI_DC-BI_DD+BI_DD-BI_DA+BI_DA-BI_DB+BI_DB-FunctionBi-directional pair +CBi-directional pair -CBi-directional pair +DBi-directional pair -DBi-directional pair +ABi-directional pair -ABi-directional pair +BBi-directional pair -B