Dell PowerConnect W-Airwave User Manual

Also see for PowerConnect W Airwave 7.1: User guide Manual Manual Quick start guide

Contents

Enter Longitude and Latitude Distance between floors Attenuation between floors User (client device) transmit power Desired data rate Address (optional)Field DescriptionBuilding Name of the building; located on an existing campus.Campus Pull down of all campuses configured on your AMP.Longitude &LatitudeThese fields are used to represent a building on Google Earth.Distance betweenFloorsThe normal distance between floors in the building. This value can be overridden as each floor iscreated, but this will be the default value for every new floor added to the system. This dataelement can be imported or exported to external planning tools like Ekahau. It is not currentlyutilized by AWMS and VisualRF.Attenuationbetween FloorsEnter the attenuation loss in decibels between floors. This value can be overridden as each floor iscreated, but this will be the default value for every new floor added to the system. This dataelement can be imported or exported to external planning tools like Ekahau. It is not currentlyutilized by AWMS and VisualRF.User TransmitPowerThis value is used when auto-provisioning access points onto a floor plan.Desired Data Rate Data rate will determine the new access points when auto-provisioning Greenfield deploymentAddress Building or Campus address.4. Click on the “OK” button to save. You will see a new Building icon appear in the middle of thecanvas.5. Drag the Building icon to the appropriate location on the map background.Note: QuickView automatically saves background map images, campus locations, building locations, and building types.6. Add appropriate geographical background or upload a personalized image by right-clicking on thebackground. Set Map – allows you to browser with Dell included maps. Custom – launches the image upload wizard documented below in the Importing FloorPlans section.18 Visual RF an d Visual RF Plan | User Guide