Dell PowerEdge 1-U Keyboard Tray Installation Manual

Also see for PowerEdge 1-U Keyboard Tray: Datasheet

Contents

Dell PowerEdge 1-U Keyboard Tray Installation Manual Manual pdf 13 page image

Installation Guide 1-115 (Optional) If desired, to further secure the slide assemblies, you can install the four 10-32 x0.5-inch flange-head Phillips screws and centering washers that came with the 1-U keyboardtray kit. Mount a centering washer on each screw and install the screw through the centersquare hole for each rail into the screw hole in the mounting-bracket flange. See Figure 1-4.Installing the 1-U Keyboard Tray in the Rack1 Pull the left- and right-slide rails out of the slide assemblies until you feel the rails lock in thefully extended position.2 Align the 1-U keyboard tray rails with the fronts of the slide rails, insert the tray rails into theslide rails, and push the tray steadily into the rack (you may need to give an extra push at onepoint to overcome the locking mechanism). See Figure 1-5.Figure 1-5. Installing the Keyboard Tray in the Rackshipping screwat back of traycable-management arm