Dell PowerEdge 1800 Supplementary Manual

Also see for PowerEdge 1800: Information update Hardware installation guide Quick reference Installation and troubleshooting guide

Contents

Dell PowerEdge 1800 Supplementary Manual Manual pdf 18 page image

16 Installing the Tower-to-Rack and Rack-to-Tower Kitsw w w . d e l l . c o m | s u p p o r t . d e l l . c o m Installing the Bezel1 Insert the two tabs on the inside left edge of the bezel into the corresponding slots on thesystem front panel, and pivot the bezel inward to its closed position.NOTE: When you are closing the right side of the rack-mount system’s bezel, hold the bezel's leftside so that the inside bezel tabs remain properly engaged in the front-panel bezel slots.2 Use the system key to lock the bezel.Stabilizing the Tower SystemCAUTION: The tower system has four stabilizer feet on its bottom panel that can be rotated outward tohelp properly stabilize the system. Ensure that the four stabilizer feet are rotated outward before youoperate the system. See Figure 1-14.Figure 1-14. Rotating the Tower System Stabilizer Feetstabilizer feet (4)tower systemP2648bk0.book Page 16 Thursday, October 14, 2004 11:18 AM

/ 20

Related manuals for Dell PowerEdge 1800