Dell PowerEdge 1955 Installation Manual

Also see for PowerEdge 1955: Information update Hardware owner's manual Use guide Quick start guide Configuration guide

Dell PowerEdge 1955 Installation Manual Manual pdf 14 page image

12 Rack Installation Guide3 At the back of the cabinet, pull back on the mounting-bracket flange until the mountingholes align with their respective holes on the back vertical rail.4 Install three 10-32 x 0.5-inch flange-head Phillips screws in the back mounting flangeto secure the rail assembly to the back vertical rail.5 Repeat steps 1 through 4 for the rail assembly on the other side of the rack.NOTE: Ensure that the rails are mounted at the same vertical position on both sides of the rack.Figure 1-6. Installing the VersaRails Rail AssembliesInstalling the System in the RackCAUTION: If you are installing more than one system, install the first system in the lowest availableposition in the rack.CAUTION: Never pull more than one component out of the rack at a time.CAUTION: Because of the size and weight of the system, never attempt to install the system in the rackby yourself.rail assemblymounting-bracketflangefront of rackrail assemblies (2)flange-headPhillips screws (3)vertical rail