w w w . d e l l . c o m | s u p p o r t . d e l l . c o mDell™ SystemsActivating the RAID ControllerRAIDActivation du contrôleur RAIDAktivieren des RAID-ControllersActivación del controlador RAID          

Dell PowerEdge 2600 Manual

Introduction

Dell Servers that Support Wake‐on‐LAN

Supported Operating Systems

Using WOL after A/C Power Disconnect or with no Operating System (OS) Installed Out‐of‐Box, or D0uninitialized)

Enabling WOL under Microsoft Windows NT 4.0

Enabling WOL under Microsoft Windows 2000 Server or Microsoft Server 2003 Family Operating Systems

Enabling WOL under Red Hat Enterprise Linux® versions 4 and later and SUSE Linux Enterprise Server versions 9 and later

PowerEdge 2600

before you begin

avant de commencer

bevor sie beginnen

antes de empezar

power rating

raid controllers

novell netware

installation guide

basic troubleshooting

observing the boot routine

running the system diagnostics

error messages

power indicator codes

nic indicator codes

system beep codes

system messages

warning messages

system overview

supported operating systems

technical specifications

jumpers and connectors

system board connectors

disabling a forgotten password

removing and replacing parts

removing the bezel

replacing the cover

peripheral bay

removing the control panel

system fans

removing the front fan assembly

power supplies

expansion cards

removing an expansion card

chassis intrusion switch

scsi id numbers

hard drives

installing a hard drive

raid controller card

scsi backplane board

replacing the scsi backplane board

memory module installation guidelines

installing memory modules

removing and replacing a microprocessor

system battery

system board

using the system setup program

integrated devices screen

system security screen

exit screen

deleting or changing an existing system password