|
3-16 Dell PowerEdge 6350 Systems User’s Guide5. From the Dell IntranetWare Support Menu, type 2 to select Format primaryDOS partition.6. When prompted, type y and press to proceed with the format.7. From the Dell IntranetWare Support Menu, type 3 to select Copy DOS systemfiles to hard-drive.8. Read the message that appears and type y to continue.The message FILE TRANSFER COMPLETE appears and you are returned to thea:\ prompt.9. Remove theDell IntranetWare Support CD from the drive and press to reboot the system.Your hard-disk drive has been prepared for IntranetWare installation. Continue tothe next subsection, “Installing SCSI Drivers During IntranetWare 4.11Installation.”,QVWDOOLQJ6&6,'ULYHUV'XULQJ,QWUDQHW:DUH,QVWDOODWLRQThis section describes how to install the aic78u2.ham and aha2940.ham drivers atthe same time you install IntranetWare. If you have a RAID controller, you should alsoinstall the pedge4xx.dsk driver during this process.If IntranetWare is already installed and you want to install or update the aic78u2.hamand aha2940.ham drivers, refer to the IntranetWare User’s Guide for installationinstructions. Also, refer to the IntranetWare User’s Guide for information about parti-tioning, creating a server name, and checking the Internetwork Packet Exchange (IPX)network number.Follow these steps only if you are upgrading to IntranetWare or installing it for the firsttime:1. Make backup copies of all IntranetWare diskettes and use those backup copies asyour working diskettes.2. Start up the server.3. Insert the Novell IntranetWare CD into the CD-ROM drive.4. Change to the CD-ROM drive prompt.The installation files are located in the root directory on the CD-ROM drive.5. Type install and press .6. Select a language at the language selection screen and press .7. Read and accept the license agreement to continue installation.8. Select NetWare Server Installation as the type of installation and press.
|
