System Security ScreenTable 2-5 lists the options and descriptions for the information fields that appear on the System Security screen.Table 2-5. System Security Screen OptionsConsole Redirection ScreenTable 2-6 lists the options and descriptions for the information fields that appear on the Console Redirection screen.Table 2-6. Console Redirection Screen OptionsExit ScreenAfter you press to exit the System Setup program, the Exit screen displays the following options:l Save Changes and Exitl Discard Changes and Exitl Return to SetupSystem and Setup Password FeaturesOption DescriptionSystemPasswordDisplays the current status of your system's password security feature and allows you to assign and verify a new system password.NOTE: See "Using the System Password" for instructions on assigning a system password and using or changing an existing systempassword.SetupPasswordRestricts access to the System Setup program in the same way that you restrict access to your system using the system password feature.NOTE: See "Using the Setup Password" for instructions on assigning a setup password and using or changing an existing setup password.PasswordStatusSetting the Setup Password option to Enabled prevents the system password from being changed or disabled at system start-up.To lock the system password, assign a setup password in the Setup Password option and then change the Password Status option toLocked. In this state, you cannot change the system password using the System Password option and cannot be disabled at system startup by pressing .To unlock the system password, enter the setup password in the Setup Password field and then change the Password Status option toUnlocked. In this state, you can disable the system password at system start up by pressing and then change the passwordusing the System Password option.Power Button(Enableddefault)Turns system's power off and on.l If you turn off the system using the power button and the system is running an ACPI-compliant operating system, the system canperform an orderly shutdown before power is turned off.l If the system is not running an ACPI-compliant operating system, power is turned off immediately after the power button is pressed.The button is enabled in the System Setup program. When disabled, the button can only turn on system power.AC PowerRecovery(Last default)Determines how the system reacts when power is restored to the system. If system is set to Last, the system returns to the last powerstate. On turns on the system after power is restored. When set to Off, the system remains off after power is restored.Option DescriptionConsole Redirection(Off default)Sets the console redirection feature to Serial Port 1 or Off.Failsafe Baud Rate(11520 default)Displays if the failsafe baud rate is used for console redirection.Remote Terminal Type(VT 100/VT 220 default)Select either VT 100/VT 220 or ANSI.Redirection After Boot(Enabled default)Enables or disables console redirection after your system restarts.
