Dell PowerEdge 840 Information Update

Also see for POWEREDGE 840: Install guide Getting started guide Hardware owner's manual Installation instructions

Contents

using the setup password

Dell PowerEdge 840 Information Update Manual pdf 1 page image

Dell™ PowerEdge™ 840 SystemsInformation UpdateThis document provides updated information for your system on the following topic:Using the Setup PasswordWhen a setup password is enabled for the System Setup program, the system gives you one chance toenter the setup password correctly. If you enter the password incorrectly, the system displays an errormessage and opens the System Setup program for viewing only. You will not be able to change any of theSystem Setup fields except for the system password. If you have already entered the system passwordduring the current session, you can change the system password if the Password Status field is set toUnlocked. To change the Password Status field from Locked to Unlocked, you must enter the correctsetup password.___________________Information in this document is subject to change without notice.© 2006 Dell Inc. All rights reserved. Printed in Malaysia.Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc. Other trademarks and trade names may be used in thisdocument to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest intrademarks and trade names other than its own.September 2006FJ099ap0.fm Page 9 Wednesday, September 6, 2006 3:10 PM

/ 1

Related manuals for Dell POWEREDGE 840