Using the Setup PasswordWhen a setup password is enabled for the System Setup program, the system gives you one chance toenter the setup password correctly. If you enter the password incorrectly, the system displays an errormessage and opens the System Setup program for viewing only. You will not be able to change any ofthe System Setup fields except for the system password. If you have already entered the system passwordduring the current session, you can change the system password if the Password Status field is set toUnlocked. To change the Password Status field from Locked to Unlocked, you must enter the correctsetup password.__________________Information in this document is subject to change without notice.© 2006 Dell Inc. All rights reserved. Printed in Malaysia.Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc. Other trademarks and trade names may be used inthis document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interestin trademarks and trade names other than its own.3 PWR_CONN Power supply connector4 DIMM1_A Memory module5 DIMM2_A Memory module6 DIMM1_B Memory module7 DIMM2_B Memory module8 FAN Fan power connector9 BATTERY 3.0 V coin battery connector10 SATA_0 SATA 0 hard drive connector11 SATA_1 SATA 1 hard drive connector12 PCI_FAN PCI fan connector13 FP_CONN1 Control panel interface connector14 IDE Optical drive interface connector15 HD_ACT_CARD Hard drive activity connector (expansion controller)16 INTRUSION_SWITCH Connector for the chassis intrusion switch17 RISER_CONN1 Riser card interface connectorTable 1. System Board Connectors (continued)Item Connector Description