Dell PowerEdge C1100 Hardware Owner's Manual

Also see for PowerEdge C1100: Portfolio guide Getting started guide Use instructions Information update Getting started with

Contents

40 Using the System Setup ProgramPCI-E SLOT OptionRom (Enabled default)Enables or disables add-on card option rom.PCI-E Connector OptionRom (Enabled default)Enables or disables board to board PCI-E connectoroption rom.NIC1 Mac Address Displays the NIC1 MAC address.NIC2 Mac Address Displays the NIC2 MAC address.Current QPI Frequency Enables or disables the QPI frequency.QPI Link Speed(Full-Speed default)Enables or disables the QPI link speed.QPI Frequency(Auto default)Enables or disables the QPI frequency.QPI L0s and L1(Enabled default)Enables or disables the QPI L0s and L1.Crystal Beach / DMA(Disabled default)Enables or disables the Crystal Beach / DMAconfiguration.Intel VT-d(Disabled default)Enables or disables the Intel® Virtualization Technologyfor Directed I/O.SR-IOV Supported(Disabled default)Enables or disables SR-IOV support.Active State PowerManagement(Disabled default)Enables the individual serial Links in a PCI Express fabricto be incrementally reduced as a Link becomes less active.ME Support(Enabled default)Enables the Management Engine (ME) to allow for theuse of Intel AMT.Port 2 Width Select the Port 2 Width. Settings: X2 or X2/X4.Option Description