50 Using the System Setup ProgramSecurity MenuExit MenuOption DescriptionSupervisor Password Displays whether the supervisor password is installed or not.User Password Displays whether the user password is installed or not.Change SupervisorPassword/Change UserPasswordUse this option to install, change or clear the password.If you select these items and press Enter, a dialog box appearsand then you can enter a password. You can enter no more thansix letters or numbers. Press Enter after you have typed in thepassword. A second dialog box asks you to retype the passwordfor confirmation. Press Enter after you have retyped it correctly.The password is required at boot time, or when the user entersthe Setup Utility.User Access Level Set user access level to the setup utility.Clear User Password Select to clear the user password.Password Check Set the password check mode.Option DescriptionSave Changes andExitSelect to save any changes that you have made in theSetup utility and exit the Setup utility.Discard Changesand ExitSelect to discard any changes that you have made in theSetup utility and exit the Setup utility.Discard Changes Select to discard any changes you have made without leavingthe Setup utility.Load OptimalDefaultsSelect to install optimal settings for all the items inthe Setup utility.Load 2nd Defaults Select to install 2nd default values from GPNV for all the itemsin the Setup utility.Save 2nd Defaults Select to save all the setup questions to GPNV as 2nd defaultvalues.
