5. guide pin on the chassis (2)Removing a GPU riser cable from the system boardPrerequisitesNOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should only bedone by Dell certified service technicians.CAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.CAUTION: The GPU riser cables should be removed before removing the GPUs to prevent pindamage in the GPU connectors on the system board.1. Ensure that you read the Safety instructions.2. Follow the procedure listed in Before working inside your system.Steps1. Press the release latches located on the GPU riser cable connector on the system board.NOTE: Pressing the release latches will not eject the GPU riser cable from the system board.2. Pull the GPU riser cable out of the GPU riser cable connector on the system board.Figure 48. Removing and installing a GPU riser cable from the system board1. riser cable connector 2. riser cable connector on the systemboard3. release latch114
