Dell PowerEdge C5220 Hardware Owner's Manual

Also see for PowerEdge C5220: Manual Portfolio guide Using instructions Getting started guide Technical guide

Contents

Dell PowerEdge C5220 Hardware Owner's Manual Manual pdf 56 page image

56 Installing System ComponentsRemoving a Memory Module1 Remove the sled from the system. See "Sled Configuration" on page 51.2 Push the locking latches of the DIMM slot outwards. See Figure 3-5.3 Remove the memory module from the system.12 sled DDR3 ECCUDIMM/4096 MB*21 2 VLPUDIMM1333 2R x8 2Gb 8G • •12 sled DDR3 ECCUDIMM/2048MB*2+4096 MB*21 4 VLPUDIMM1333 2R x8 1Gb/2Gb 12G 2G 4G 2G 2G12 sled DDR3 ECCUDIMM/4096 MB*41 4 VLPUDIMM1333 2R x8 2Gb 16G • • • •WARNING: The memory modules are hot to touch for some time after the systemhas been powered down. Allow time for the memory modules to cool beforehandling them. Handle the memory modules by the card edges and avoid touchingthe components on the memory module.CAUTION: Many repairs may only be done by a certified service technician. Youshould only perform troubleshooting and simple repairs as authorized in yourproduct documentation, or as directed by the online or telephone service andsupport team. Damage due to servicing that is not authorized is not covered bywarranty. Read and follow the safety instructions that came with the product.Supported MemoryConfigura-tionMemory Type/Size CPU DIMMs Type MemorySpeed(MHz)Rank Type(x8, x4)ComponentDensityTotalSizeDIMM SlotA1 A2 A3 A4