Dell PowerEdge C6400 Installation And Service Manual

Also see for PowerEdge C6400: Installation and service manual

Contents

Dell PowerEdge C6400 Installation And Service Manual Manual pdf 72 page image

Steps1 Insert the drive cage into the enclosure, aligning the drive cage with the standoffs on the chassis.2 Slide the drive cage toward the lock position.3 Using the Phillips #1 screwdriver, secure the drive cage in place with screws.Figure 56. Installing the 3.5 inch drive cageNext steps1 Reconnect all the backplane cables that were disconnected from the linking board and chassis management board.2 Install all the removed drives.3 Install the fan cages.4 Follow the procedure listed in After working inside your system.Related linksInstalling a hard driveInstalling the cooling fan cageBackplanes and expander boardFigure 57. 24 x 2.5 inch backplane1 SATA connector (24) 2 expander power connector72 Dell PowerEdge C6400 Installation and Service ManualInstalling and removing enclosure components