106 Using the System Setup ProgramCommand Line Interfaces for System SetupOptionsThe options in the System Setup menu allows you to control the SystemConfiguration Utility (syscfg). This utility is included in the DellOpenManage Deployment Toolkit (DTK).See the Deployment Toolkit Version 1.3 User's Guide for additionalinformation about installing and using the DTK utilities, and theDeployment Toolkit Version 1.3 Command Line Interface Reference Guidefor a complete list of all valid options, suboptions, and arguments for usingthe BMCCFG.EXE to configure and manage your BMC.You can use the system configuration utility for the following conditions:• To change the System Setup option by D4 token:./syscfg –t=D4_token_id(Example: ./syscfg -t=0x002D to enable NIC1 Option ROM)• To check token activity status:./syscfg --istokenactive=D4_token_id(Example: ./syscfg --istokenactive=0x002D to check the token activestatus of NIC1 Option ROM)• To directly change the System Setup option through BMC memory:./ipmitool raw (Example: ./ipmitool raw 0xc 1 1 3 10 106 42 120 to set IP address of BMCmanagement port as 10.106.42.120)Table 2-1. D4 Token TableToken Setup Option Description002D Embedded NIC1 Enables the onboard NIC1 controller (full-function),including its PXE boot-ROM.002E Embedded NIC1 Disables the onboard NIC1 controller.0051 N/A For the next system boot, set the IPL priority to: USBstorage, hard disk, CD/DVD-ROM, RAID, Network (ifthe devices are available).
