Option DescriptionMAC Displays the MAC addresses for iDRAC, iSCSI, or Network devices.Name Displays the name of the Host, Model, or User String for the systemNumber Displays the Asset tag or the Service tag for the system.Power Displays the power output of the system in BTU/hr or Watts. The display format can beconfigured in the Set home submenu of the Setup menu.Temperature Displays the temperature of the system in Celsius or Fahrenheit. The display format can beconfigured in the Set home submenu of the Setup menu.Diagnostic IndicatorsNOTE: The diagnostic indicators are present only on PowerEdge R720xd.The diagnostic indicators on the system front panel display error status during system startup.NOTE: No diagnostic indicators are lit when the system is switched off. To start the system, plug it into a workingpower source and press the power button.The following section describes system conditions and possible corrective actions associated with these indicators:Health indicatorCondition Corrective ActionIf the system is on,and in good health,the indicator lightssolid blue.None required.The indicator blinksamber if the systemis on or in standby,and any error exists(for example, a failedfan or hard drive)See the System Event Log or system messages for the specific issue.Invalid memory configurations can cause the system to halt atstartup without any video output. See Getting Help.Hard-drive indicatorCondition Corrective ActionThe indicator blinksamber if a hard driveexperiences anerror.See the System Event Log to determine the hard drive that has anerror. Run the appropriate Online Diagnostics test. Restart systemand run embedded diagnostics (ePSA). If the hard drives areconfigured in a RAID array, restart the system and enter the hostadapter configuration utility program.14
