Dell PowerEdge M1000e Technical Manual

Also see for PowerEdge M1000e: Manual Command reference guide Owner's manual Update Getting started guide

Contents

Dell PowerEdge M1000e Technical Manual Manual pdf 55 page image

DellPowerEdge M1000e Technical Guide 54Figure 44. M1000e VersaRails Static RailsThe VersaRails static rails are not intended to be mounted in threaded hole racks since the railscannot be fully tightened and secured against the rack mounting flange. Neither the VersaRails northe RapidRails kits support mounting in 2-post racks.MountingInterfaceRailTypeRack Types Supported Rail Adjustability Range (mm)4-Post 2-Post Square Round ThreadedSquare Round Thread Flush Center Min Max Min Max Min MaxRapidRails Static √ X X X X 712 755 — — — —VersaRails Static √ √ X X X 706 755 706 755 — —The min-max values listed in the table above represent the allowable distance between the front andrear mounting flanges in the rack.12.3 Cable Management Arm (CMA)Since the M1000e does not need to be extended out of the rack for service, neither the RapidRailsnor the VersaRails static rail systems support a cable management arm. Included instead are a strainrelief bar and cable enumerator clips to help manage and secure the potentially large number ofcables exiting the back of the system.