Dell PowerEdge M1000e Technical Manual

Also see for PowerEdge M1000e: Manual Command reference guide Owner's manual Update Getting started guide

Contents

Dell PowerEdge M1000e Technical Manual Manual pdf 9 page image

9 PowerEdge M1000e Technical GuideTable 1 lists the technical specifications for the PowerEdge M1000e blade enclosure. For the latestinformation on supported features, visit Dell.com/PowerEdge.Technical specificationsTable 1.Feature ParameterChassisenclosureForm factor: 10U modular enclosure holds up to 8 full-height, 16 half-height, or32 quarter-height blade serversDimensions:44.0cm (17.3 in.) H x 44.7cm (17.6 in.) W x 75.4cm (29.7 in.) DWeight: Empty chassis — 98 lb Chassis with all rear modules (I/O modules, PSUs, CMCs, KVM) — 176 lb Chassis fully loaded with blade servers and rear modules — 394 lbPower supplies Up to six 2700W high-efficiency hot-plug power supplies or up to six -48V DC 2700Wpower suppliesBased on Dell’s Energy Smart technologies, the M1000e power supplies deliver greaterlevels of efficiency, even at low levels of utilization.Supported power supply configurations include: 3+3 and 2+2 (grid redundancy) 2+1, 3+1, 4+2, and 5+1 (power supply redundancy) 2+0 and 3+0 (non-redundant mode)The M1000e chassis supports dynamic power supply engagement (DPSE) mode, whichif enabled, puts lightly loaded power supplies into standby mode, driving up theutilization and the efficiency of the active supplies.Dell supports either 110–120V or 208–240V AC power supply input and supports a widerange of power distribution options. Dell recommends 208–240V AC for all productionenvironments.Cooling fans M1000e chassis comes standard with nine hot-pluggable, redundant fan modules: Based on Dell Energy Smart technologies, M1000e fans are a breakthrough inpower and cooling efficiency Fans deliver low-power consumption, but also use next-generation fantechnologies to ensure the lowest possible amount of fresh air is consumed to coolthe enclosureInput device Front control panel with interactive graphical LCD Supports initial configuration wizard Local server blade, enclosure, and module information and troubleshootingTwo USB keyboard/mouse connections and one video connection (requires theoptional Avocent® iKVM switch to enable these ports) for local front “crash cart” consoleconnections that can be switched between blades