Dell PowerEdge M420 User Manual

Also see for PowerEdge M420: Manual Command reference guide Owner's manual Administrator's guide Information update

Contents

Dell PowerEdge M420 User Manual Manual pdf 8 page image

Installation and Basic OperationRev 1.082 Installation and Basic Operation2.1 Unpacking the Pass Through ModuleBefore you install your new PTM, unpack it and make sure that there is no visible damage thatmay have occurred during shipping. Your package should contain the following items:• Dell -10GbE Pass Through Module for Blade Servers• This User’s ManualThe PTM is shipped without optical modules.If anything in the package is damaged or missing, please contact your customer representativeimmediately.2.2 Insertion and Removal of the PTMThe Dell 10Gb Ethernet Pass Through II may be plugged into fabric slots B1, B2, C1, and C2.Determine which slot to use, based on desired system configuration.2.2.1 PTM InsertionInsert the PTM into the chassis as shown in the following diagram:Figure 3: Dell Chassis Slots for the PTMSlot B1 Slot C1 Slot B2Slot C2