Dell PowerEdge M820 Systems Owner's Manual
Also see for PowerEdge M820 Systems: ManualCommand reference guideOwner's manualInformation updateRelease notes
                                                                                                                                                       | |
Contents
| 
System Information ScreenMenu Item DescriptionSystem Model Name Displays the system model name.System BIOS Version Displays the BIOS version installed on the system.System Service Tag Displays the system Service Tag.System Manufacturer Displays the name of system manufacturer.System ManufacturerContact InformationDisplays the contact information of the system manufacturer.Memory Settings ScreenMenu Item DescriptionSystem Memory Size Displays the amount of memory installed in the system.System Memory Type Displays the type of memory installed in the system.System MemorySpeedDisplays the system memory speed.System MemoryVoltageDisplays the system memory voltage.Video Memory Displays the amount of video memory.System MemoryTestingSpecifies whether system memory tests are run during system boot. Options are Enabled andDisabled. By default, the System Memory Testing option is set to Disabled.Memory OperatingModeSpecifies the memory operating mode. The options available depending on the memoryconfiguration of your system are Optimizer Mode, Advanced ECC Mode, Mirror Mode, SpareMode, Spare with Advanced ECC Mode, and Dell Fault Resilient Mode. By default, the MemoryOperating Mode option is set to Optimizer Mode.NOTE: The Memory Operating Mode can have different defaults and available optionsbased on the memory configuration.NOTE: The Dell Fault Resilient Mode establishes an area of memory that is fault resilient.This mode can be used by an operating system that supports the feature to load criticalapplications or enables the operating system kernel to maximize system availability.Node Interleaving If this field is Enabled, memory interleaving is supported if a symmetric memory configuration isinstalled. If Disabled, the system supports Non-Uniform Memory architecture (NUMA)(asymmetric) memory configurations. By default, Node Interleaving option is set to Disabled.Serial Debug Output By default, it is set to disabled.14 |
Related manuals for Dell PowerEdge M820 Systems
Dell PowerEdge T320 Series Owner's Manual
Dell PowerEdge 830 System User's Manual
Dell POWEREDGE 840 Hardware Owner's Manual
Dell POWEREDGE 1900 Hardware Owner's Manual
Dell PowerEdge T310 Hardware Owner's Manual
Dell POWEREDGE 1950 Hardware Owner's Manual
Dell POWER EDGE 2900 Hardware Owner's Manual
Dell PowerEdge 850 User Manual
Dell DIMENSION 3000 SYSTEMS DMC Owner's Manual
Dell PowerEdge 1400 User Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine