Removing the bladePrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.1. Ensure that you read the Safety instructions.2. Power down the blade using OS commands or the CMC, and ensure that the blade's power is off.When a blade is powered off, its front-panel power indicator is off.3. Before removing the blades from full-height blade slots 3 or 4, rotate the LCD panel to the storageposition to prevent accidental damage to the LCD screen.CAUTION: To protect the I/O connector pins, install the I/O connector cover any time a blade isremoved from the enclosure.CAUTION: If you are permanently removing the blade, install a blade blank. Operating the systemfor extended periods of time without a blade blank installed can cause the enclosure to overheat.Steps1. Press the release button on the handle.2. Pull out the handle to unlock the blade from the enclosure.3. Slide the blade out of the enclosure.4. Install the I/O connector cover over the I/O connector.38
