Dell PowerEdge PDU Managed LED Manual

Also see for PowerEdge R320: Manual Owner's manual Owner's manual Technical guide Portfolio guide

Contents

Dell PowerEdge PDU Managed LED Manual Manual pdf 11 page image

Cable Routing Procedures for Dell PowerEdge R320 & R420 Systems11Section 4: Cabling a PowerEdge R320 or R420 system installedon static railsNOTE: The CMA is compatible only with the sliding rails, not the static rails.1. Follow the instructions contained in the Rack Installation Instructions found in the static rail kit toinstall the server into a two-post or four-post rack.2. Install the hook-and-loop straps provided in the rail kit through the slots in the rear brackets of therails as described in the Rack Installation Instructions.3. Connect all applicable cables to the rear of the system and verify that all connections are secure.4. Using the hook-and-loop straps, bundle the cables and secure them to either the left rail or rightrail as described in the Rack Installation Instructions. See Figure 12 for an example of data cablessecured to the left rail and power cables secured to the right rail (as viewed from the rear of thesystem).Cabling a system installed in static railsFigure 12.

/ 11

Related manuals for Dell PowerEdge R320