Dell PowerEdge R200 Update Manual

Also see for PowerEdge R200: Hardware owner's manual Install guide Getting started guide Getting started

Contents

Dell PowerEdge R200 Update Manual Manual pdf 2 page image

Removing and Installing the Optional SATAOptical Disk DriveThe following section updates the optical disk drive removal and installationprocedures in your system documentation.Removing the Optical DriveCAUTION: Only trained service technicians are authorized to remove the systemcover and access any of the components inside the system. Before you begin thisprocedure, review the safety instructions that came with the system.1 Turn off the system and attached peripherals, and disconnect the systemfrom the electrical outlet and peripherals.2 Open the system. See "Opening the System" in your Hardware Owner’sManual.3 Disconnect the SATA power and data cables from the optical drive.See Figure 1.4 Press the bracket release lever that secures the optical drive to the harddrive 0 carrier.5 Lift and tilt the optical drive up and out of the bracket.