StepsLocate the SD card slot on the internal dual SD module and press the card to release it from the slot.Next stepsFollow the procedure listed in After working inside your system.Installing an internal SD cardPrerequisites1. Ensure that you read the Safety instructions.2. Follow the procedure listed in Before working inside your system.CAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.NOTE: To use an SD card with your system, ensure that the Internal SD Card Port is enabled in theSystem Setup.Steps1. Locate the SD card connector on the internal dual SD module. Orient the SD card appropriately andinsert the contact-pin end of the card into the slot.NOTE: The slot is keyed to ensure correct insertion of the card.2. Press the card into the card slot to lock it into place.Next stepsFollow the procedure listed in After working inside your system.Removing the internal dual SD modulePrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.1. Ensure that you read the Safety instructions.2. Follow the procedure listed in Before working inside your system.Steps1. Locate the internal dual SD module on the system board.2. If installed, remove the SD card(s).3. Hold the plastic pull tab and pull the dual SD module out of the system board.88